What Are Flatlock Seams in Swimwear and Why They Matter
Quick Summary
Flatlock seams are stitches where two fabric edges lie flat side by side instead of folding over or stacking up. In swimwear, this low profile rests smoothly against the skin, which reduces rubbing and chafing during long days in the water or at the beach.
- Flatlock seams lie flat against the body, so they are easy to overlook when wearing a garment.
- A flatlock machine can produce butted seams, where edges meet, or lap seams, where one edge overlaps.
- Flatlock seams are often sewn with stretchy textured thread so they move with the fabric.
- Compared with overlock seams, flatlock seams feel smoother against the skin and sit lower on the fabric.
- Gently stretch the fabric near the seam; a well-made flatlock seam should lie flat and move with it.
Table of Contents
- What a Flatlock Seam Is
- How Flatlock Seams Are Constructed
- Flatlock Stitch vs Overlock: Key Differences
- Coverstitch and Other Seam Types Compared
- Comfort, Stretch, and Durability in Swimwear
- How to Identify Flatlock Seams on a Swimsuit
- When Flatlock Seams Are Not the Best Choice
- Choosing a Swimsuit Built for Full Sun Coverage
- Frequently Asked Questions
What a Flatlock Seam Is
A flatlock seam is a stitch where two fabric edges sit side by side and lie flat against each other, rather than folding over or stacking up. In swimwear, this flat profile matters because the seam rests against the skin instead of ridging out from it.
A well-made flatlock seam is designed to lie flat against the body, so it is easy to overlook when wearing a garment.
How Flatlock Seams Are Constructed
A flatlock seam is built on a flatlock machine, which is a specialized overlock-type machine set up to join two fabric edges and lay them flat rather than wrapping them into a raised ridge. The key mechanical difference is that the machine can be threaded to produce either a butted seam (edges meet edge-to-edge) or a lap seam (one edge overlaps the other), and the thread path is adjusted so the stitch locks the edges in a low-profile position.
Here is what happens in a typical flatlock construction:
- The two fabric pieces are aligned edge to edge or with a slight overlap, depending on the seam style
- The machine trims any excess edge as it feeds the fabric through
- A cover thread and a needle thread form loops that bridge the two edges
- The stitch is pulled tight so the seam lies flat and the edges butt together
- The finished seam has stretch built in because the thread loops can extend and recover with the fabric
A true flatlock seam is often called a butted flatlock because the fabric edges meet rather than overlap.
Thread choice matters. Flatlock seams are often sewn with a textured thread that has some inherent stretch, because a rigid thread can snap or pucker when the fabric stretches. The machine tension is set so the seam sits flat without tunneling or grinning (showing gaps between the stitch loops).

Flatlock Stitch vs Overlock: Key Differences
Flatlock stitches and overlock stitches are both common in clothing, but they look and feel different.
| Feature | Flatlock | Overlock |
|---|---|---|
| Profile | Flat, low ridge | Raised, more bulk |
| Edge finish | Edges butt together | Edges wrapped by thread |
| Comfort against skin | Smoother | Can feel firmer |
| Stretch | Good for active wear | Good for stretch and strength |
An overlock seam trims and wraps the fabric edges with thread. This makes a strong edge, but the seam sits higher on the fabric. Flatlock is usually the better pick when comfort against skin is the main goal.
Coverstitch and Other Seam Types Compared
Coverstitch is another common seam used in stretch clothing. It creates parallel lines of stitching on the outside and a looped stitch inside, which lets the hem stretch without popping.
Flatlock, overlock, and coverstitch each do a different job:
- Flatlock: Best for comfort and a smooth finish
- Overlock: Best for edge strength and trimming
- Coverstitch: Best for stretchy hems and visible decorative lines
Many swimsuits combine these seam types in different places on the same garment.
Comfort, Stretch, and Durability in Swimwear
Swimwear has to handle three things at once: skin contact, constant movement, and water. Seam construction affects all three.
A flat seam reduces rubbing and chafing. That is helpful during long days at the beach or on the water. Stretch recovery matters too, because a seam that cannot stretch with the fabric can pull or pucker over time.
Durability depends on the stitch, the thread, and the fabric. Compare the top full-coverage picks for skin cancer risk to see how these factors play out in real suits.
How Flatlock Seams Hold Up to Chlorine, Salt Water, and Sun
Pool chemicals, ocean salt, and sun exposure all wear on swimwear.
- Chlorine: Look for thread and elastic that resist chemical breakdown
- Salt water: Rinse suits after use to reduce salt buildup
- Sun: UV exposure can weaken fibers over time, so store suits out of direct light
Care habits make a big difference in how long a flatlock seam keeps its shape.
How to Identify Flatlock Seams on a Swimsuit
You can usually spot a flatlock seam by looking closely at the garment.
Check for these signs:
- The seam lies flat with no raised ridge
- Two fabric edges meet in a straight line
- Stitch lines run across the seam rather than wrapping around the edge
- The area feels smooth when you run a finger over it
Gently stretch the fabric near the seam. A well-made flatlock seam should lie flat and move with the fabric.
When Flatlock Seams Are Not the Best Choice
Flatlock seams are not perfect for every situation. They may not be the best choice when:
- The garment needs maximum edge strength on heavy-stress areas
- The fabric is very thick and hard to sew flat
- You want a decorative, visible stitch line
For some high-stress areas, overlock or reinforced seams may hold up better. A guide to durable swimwear for active families walks through what to check for in busy, everyday use. Ask whether the seam will face strong pulling or abrasion before deciding.
Choosing a Swimsuit Built for Full Sun Coverage
If full sun coverage is your priority, look for a suit with UPF 50+ fabric, full-length coverage, and seams built for comfort and movement. TUTUBLUE designs full-coverage sun protection swimwear with UPF 50+ fabric and CHLORATEK technology.
Consider these points when shopping:
- Confirm the UPF rating on the label
- Check that the seams lie flat and feel comfortable
- Pick a fit that stays in place during movement
- Read care instructions to help the suit last through the season
A good suit should protect your skin and feel comfortable for the whole day. For more on stylish sun-protective swimwear, see a guide to choosing options that balance style with coverage.
Frequently Asked Questions
What are flatlock seams?
A flatlock seam is a stitch in which the two fabric edges are butted together or slightly overlapped and joined with a stitch that lies flat on both faces of the garment. Because the seam has a low profile and minimal ridge, it sits smoothly against the skin rather than pressing into it. In swimwear, this construction is valued for reducing chafing during movement and for keeping the fabric comfortable across long hours in the water and on the sand. Flatlock is commonly produced on a specialized flatlock or coverstitch machine, and the result is a seam that stretches with the fabric rather than fighting against it.
Are flatlock and coverstitch the same?
They are closely related but not identical. A coverstitch is a stitch type that uses multiple needle threads and a looper to produce a flat, stretchy seam, usually with visible parallel rows on the outside of the garment. Flatlock is a specific form of this construction in which the seam is designed to lie flat with minimal bulk. Many swimwear and activewear makers use the terms interchangeably on product pages, so when shopping, look at the garment's construction details or ask the brand how the seams are made if the distinction matters to you.
Are flatlock seams stronger than overlock seams?
Strength depends on thread, stitch density, fabric, and construction quality, so no seam type is automatically stronger. Overlock seams trim and wrap the fabric edge, which gives a durable, clean edge but often adds more bulk. Flatlock seams offer better flexibility and a lower profile, which helps prevent rubbing, but they are not inherently stronger. For swimwear that will see heavy stretching and frequent washing, look for well-constructed seams in either style and check that stitching is even with no skipped stitches or loose thread.
Does flatlock stitching affect swimwear stretch?
Flatlock stitching is designed to move with stretch fabric. Because the seam is flexible and lies flat, it generally does not restrict the fabric the way a stiffer, more bulky seam can. Stretch recovery still depends mainly on the fabric itself, including its blend and elastic content, and on how well the garment fits. A suit that fits too tightly can strain any seam, so choose a size that allows comfortable movement and avoid repeatedly stretching the garment at the seams.


Leave a comment